9510 Combine Note Log
1998 John Deere Combine
Property of gbryce.
Added Mar 15 2019
Showing all notes
Jan 1 2024
4032 sep hrs.
-
6,373
Added by gbryce on Jan 1 2024 at 10:05 am
Nov 28 2023
Replaced top relay AR73144 behind batteries
-
6,345
Added by gbryce on Nov 28 2023 at 10:46 am
Nov 11 2023
Replaced sickle drive belt in 925 H138762
-
6,340
Added by gbryce on Nov 28 2023 at 10:45 am
Nov 2 2023
Replaced both with Deere Strongbox
-
6,333
Added by gbryce on Nov 2 2023 at 3:23 pm
Oct 6 2023
Engine Oil
-
6,289
Added by gbryce on Oct 6 2023 at 10:03 am
Oct 5 2023
Hour Check
-
6,284
Added by gbryce on Oct 5 2023 at 1:06 pm
Sep 18 2023
200 hr. Service
-
6,233
Added by gbryce on Nov 2 2023 at 3:25 pm
Blew combine off Tightened all chains Removed half link from clean grain elevator chain
-
6,233
Added by gbryce on Sep 18 2023 at 9:00 am
Sep 8 2023
Feederhouse Reverser Gearcase - Change Oil
-
6,180
Added by gbryce on Sep 18 2023 at 9:02 am
Sep 7 2023
Feederhouse reverser gearcase had left side oil seal start leaking. Leaked most of oil out. Got hot. Variable speed feeder house lower pulley had broken inner sheave. Replaced outer seal on reverser gearcase Replaced lower inner sheave on variable speed feeder house. Replaced both grease seals and 3 woodruff keys on lower variable speed sheaves. Replaced feederhouse belt Drained remaing oil out of reverser gearcase and refilled with GL5.
-
6,170
Added by gbryce on Sep 7 2023 at 1:49 pm
Sep 2 2023
Replaced alternator diode part # AH136309 Replaced alternator with Deere Reman
-
6,150
Added by gbryce on Sep 2 2023 at 8:31 am
Aug 18 2023
Replaced outer & inner
-
6,111
Added by gbryce on Aug 18 2023 at 11:08 am
Engine Oil
-
6,111
Added by gbryce on Aug 18 2023 at 11:08 am
Replaced 2 of 3 filters. Did not replace hydraulic filter as it was changed earlier while trying to diagnose slow header lift.
-
6,111
Added by gbryce on Aug 18 2023 at 10:26 am
Aug 17 2023
50 hr. Service
-
6,111
Added by gbryce on Aug 17 2023 at 5:28 pm
May 20 2023
Header Trailer. Replaced wheel bearings, races and seal on left front wheel
Added by gbryce on May 20 2023 at 3:52 pm
May 12 2023
Changed Lo-Vis fluid in engine gearcase. I also pulled screen. Screen was a really clean. It had a just a little but of slimy or fibrous material on it. More like oily chaff or paper towel or dirt it was not metal i am pretty sure as it did not have shiny flecks in it
-
6,056
Added by gbryce on May 12 2023 at 5:57 pm
Changed GL5 80-90 in: Final Drives Transmission Dual Range Cylinder Drive Below are pics of screen in transmission. It had a few silver flecks and smaller. I did not feel it was abnormal. Also i am not sure i pulled that screen when i changed that oil in the past.
-
6,056
Added by gbryce on May 12 2023 at 5:54 pm
Winter maintenance items. Replaced both bearings on lower tailings auger with shoup YET206 Replaced tensioner pulley AH140497 on rotary screen drive belt. Replaced fuel tank to fuel pump hose. AH146788 Replaced battery hold down H134000 Replaced Dust Fan belt. H164452 Replaced unload auger chain idler sprocket bearing JD7126 Replaced heater hoses from right side of cab to engine. (15’) TY22328, (16’) TY22330 Replaced feederhouse lower rear plate H173904
-
6,056
Added by gbryce on May 12 2023 at 5:14 pm
200 hr. Service, 400 hr. Service
-
6,056
Added by gbryce on Aug 18 2023 at 8:45 am
Jan 1 2023
3825 sep. hrs.
-
6,052
Added by gbryce on Jan 2 2023 at 10:45 am
Dec 16 2022
Replaced White added filter as we notice filter relief valve had popped out due to oil flowing in wrong direction.So we drilled suction gauge port in opposite side of housing and in reversed filter housing to correct flow direction and so oil will be flowing opposite direction.
-
6,051
Added by gbryce on Dec 16 2022 at 3:06 pm
Nov 29 2022
Blew combine off. Power washed
-
6,048
Added by gbryce on Nov 29 2022 at 4:28 pm
Nov 21 2022
Feederhouse variable speed drive upper sheave bearing locked up. I replace (2) bearings and all seals and orings on pulleys and piston
-
6,038
Added by gbryce on Nov 21 2022 at 3:48 pm
Nov 18 2022
Heater hose leak drained coolant so i had to add about 4 gallons of 50% Coolgard 2 and 50% filtered water
-
6,034
Added by gbryce on Nov 21 2022 at 3:47 pm
Nov 9 2022
3812 sep hrs. Primary countershaft splines rusted/stripped out in primary countershaft gearcase. Replaced primary countershaft gearcase AH141049 with used one out of 9400 from Cook Tractor. Used gearcase had low wear on splines and splines had grease on them and were not rusted. 9400 gearcase had a sight glass for oil fill level vs my original having a dipstick. Replaced primary countershaft AH147483 with new one from Deere Replaced primary countershaft RH bearing JD8669 with new one from Deere. Replaced primary countershaft shield AH163802 with used one from Cook Tractor. Our old one was cracked. Kevin said if those bow down until they rub the shaft, they can start a fire. Replaced feederhouse clutch swivel connector AH130582, our old one came apart. Replaced bushings H126716 and seals AB5070R in feederhouse clutch pulley. Replaced Reel Pump Belt H151952
-
6,027
Added by gbryce on Nov 9 2022 at 11:17 am
Oct 11 2022
Replaced main hydraulic pump AH227021 as header was lifting too slow when oil was warmed up.
-
5,946
Added by gbryce on Oct 11 2022 at 11:45 am
Oct 7 2022
Changed hydraulic filter above toolbox to fix slow header lift
-
5,939
Added by gbryce on Oct 7 2022 at 10:14 am
Oct 6 2022
Replaced Pressure Relief valve on Hydraulic stack Valves. This was to fix slow header lift issue. It did not fix it so old valve is still ok.
-
5,935
Added by gbryce on Oct 11 2022 at 11:45 am
Sep 26 2022
Changed with deere filter- plus 50 II Oil
-
5,920
Added by gbryce on Sep 26 2022 at 5:12 pm
[Back to Vehicle Profile]