Myth? Lean mixtures will cause engine damage - Page 3 - Fuelly Forums

Click here to see important news regarding the aCar App

Go Back   Fuelly Forums > Tech, Troubleshooting and Repair > General Maintenance and Repair
Today's Posts Search Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 08-09-2008, 07:16 PM   #21
DRW
Registered Member
 
Join Date: Oct 2006
Posts: 615
Country: United States
Quote:
Originally Posted by Pete View Post
Wouldn't the ratio of oxygen to nitrogen remain the same regardless of the volume?
The "Lean" aspect applies to the volume of air relative to the volume of fuel so although the volume of air is decreased the actual mixture of the air does not alter.

Cheers , Pete.
That's true before the mixture burns. Once ignited only the oxygen combines with the fuel to produce combustion. If there's left over O2 in during combustion (eg lean mixture) it will try to latch onto other molecules, such as nitrogen.
__________________

__________________
Dave W.
DRW is offline   Reply With Quote
Old 08-10-2008, 03:40 AM   #22
Registered Member
 
GasSavers_Erik's Avatar
 
Join Date: Nov 2006
Posts: 1,027
Country: United States
That makes sense DRW, it also explains how EGR helps reduce NOX emissions (less free oxygen in exhaust to react with nitrogen).

I suppose running ultra lean WILL increase NOX emissions.
__________________

GasSavers_Erik is offline   Reply With Quote
Old 08-10-2008, 03:58 AM   #23
Registered Member
 
theholycow's Avatar
 
Join Date: Apr 2008
Posts: 6,624
Country: United States
Send a message via ICQ to theholycow Send a message via AIM to theholycow Send a message via MSN to theholycow Send a message via Yahoo to theholycow
Hmm...so there's all this nitrogen reacting with oxygen...I wonder if there's a way to persuade it to make N2O and separate it out from the rest of the exhaust, then feed it back into the intake.
__________________
This sig may return, some day.
theholycow is offline   Reply With Quote
Old 08-10-2008, 05:47 AM   #24
Registered Member
 
GasSavers_bobski's Avatar
 
Join Date: May 2007
Posts: 463
Country: United States
I don't know about separating it, but that's more or less what EGR systems do. They mix some exhaust into the intake stream, which replaces some oxygen-rich air in the cylinder. Less oxygen in the mix means reduced NOx emissions.
GasSavers_bobski is offline   Reply With Quote
Old 08-10-2008, 06:07 AM   #25
Registered Member
 
theholycow's Avatar
 
Join Date: Apr 2008
Posts: 6,624
Country: United States
Send a message via ICQ to theholycow Send a message via AIM to theholycow Send a message via MSN to theholycow Send a message via Yahoo to theholycow
Yeah, but that's NOx, not N2O...
__________________
This sig may return, some day.
theholycow is offline   Reply With Quote
Old 08-10-2008, 08:34 AM   #26
Registered Member
 
Join Date: Nov 2007
Posts: 1,111
Country: United States
Send a message via AIM to dkjones96
Actually, that isn't how EGR works. EGR works because the extra inert gasses in the chamber absorb energy from combustion and the combustion is cooler because of that(also gives more to expand from heat of combustion). Additionally, the extra gasses take up space in the manifold and reduce vacuum a lot like our WAI are doing.

The actual oxygen/fuel ratio never changes with EGR. All stock EGR cars still run 14.7:1 on freeway cruise which is where EGR is active.
__________________
- Kyle
dkjones96 is offline   Reply With Quote
Old 08-10-2008, 01:50 PM   #27
Registered Member
 
Join Date: May 2007
Posts: 447
Country: United States
Quote:
Originally Posted by dkjones96 View Post
Engines always run their best right before they die.
Yup, thats what he kept saying...
__________________
slurp812 is offline   Reply With Quote
Old 08-10-2008, 04:29 PM   #28
Registered Member
 
Join Date: May 2008
Posts: 55
Country: United States
so why not compensate the lean with hho??

I'm leaning out my mixture with map enhancement, o2 enhancement, and wai
__________________


2001 Chevy S10 2.2 5 spd man
85,000 Miles
28-34 MPG with HHO
GasSavers_Ven is offline   Reply With Quote
Old 08-10-2008, 04:40 PM   #29
Registered Member
 
Join Date: Nov 2007
Posts: 1,111
Country: United States
Send a message via AIM to dkjones96
HHO won't help. It's a stoich mixture.
__________________
- Kyle
dkjones96 is offline   Reply With Quote
Old 08-10-2008, 09:05 PM   #30
Registered Member
 
GasSavers_bobski's Avatar
 
Join Date: May 2007
Posts: 463
Country: United States
Quote:
Originally Posted by dkjones96 View Post
[...] Additionally, the extra gasses take up space in the manifold and reduce vacuum a lot like our WAI are doing.
Uh... What? Warm air intakes work because they reduce the density of the air being pulled into the engine. Lower density means there's less oxygen (and nitrogen for that matter) per volume of air, so less fuel needs to be injected to reach a stoichiometric ratio. Manifold vacuum is unaffected by the temperature of the air.
Quote:
Originally Posted by dkjones96 View Post
The actual oxygen/fuel ratio never changes with EGR.
No, the volume of air/fuel mixture being pulled into the cylinder during each intake stroke is reduced. The mixture is diluted by the exhaust gasses. Less air and fuel being burned means less heat released in the cylinder, lower combustion temperature and therefor reduced NOx emissions.
__________________

GasSavers_bobski is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incorrect Milage Calcuatlion PatM Fuelly Web Support and Community News 4 07-17-2009 07:21 PM
Missing Fuelup jmonty Fuelly Web Support and Community News 3 05-27-2009 04:10 AM
ECT Analyzer/manual TC lockup GasSavers_Bruce Transmissions and Running Gear 60 04-01-2008 10:37 AM
How far do you drive daily? OdieTurbo General Fuel Topics 56 03-31-2007 01:49 AM

Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.