Grill block failure - Fuelly Forums

Click here to see important news regarding the aCar App

Go Back   Fuelly Forums > Fuel Talk > Aerodynamics
Today's Posts Search Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 07-08-2007, 02:53 PM   #1
Registered Member
 
Join Date: May 2007
Posts: 163
Country: United States
Grill block failure

So while I'm up at the shack for a grand week of fishing and drinking adult beverages I decided to finish up some aero work on Stinker. Where the original lower grill blocks were, I replaced them with plexiglas that wraps around to the driving lights. Then I made another that would fit in the center of the lower grill so I could take it off as needed.

With the entire lower grill blocked off:

28 miles (to town and back), speeds from 30 mph to 55 mph, mileage 21.5.

With the center opened again:

28 miles (to town and back), speeds from 30 mph to 55 mph, mileage 25.6.

From what I'm seeing here is that this part of the bumper is basically straight up and down with little angle. Blocking the entire area seems, in hindsight, to have increased the pressure on the front of the truck. I also wonder if the air dam has something to do with this since it's right below this area.

Maybe I'll make a camera mount for the front of the thing and do some tuft testing. That'll get the neighbors talking.
__________________

__________________


Proud owner of Stinkerbutt!
[SIGPIC][/SIGPIC]
-Air Raid cone filter, direct to TB
-Homebrew front air dam
-Homebrew side skirt
-Torza top bed cover
-Now featuring front wheel canards!
kitcar is offline   Reply With Quote
Old 07-08-2007, 03:30 PM   #2
Supporting Member
 
Hockey4mnhs's Avatar
 
Join Date: Dec 2006
Posts: 760
Country: United States
so have you been driveing like this the entrire time or was this justs a quick test?
__________________

__________________
Hockey4mnhs is offline   Reply With Quote
Old 07-08-2007, 03:33 PM   #3
Registered Member
 
omgwtfbyobbq's Avatar
 
Join Date: Jul 2006
Posts: 1,516
Country: United States
What's the route altitude like?
__________________
Quote:
Originally Posted by FormulaTwo
I think if i could get that type of FE i would have no problem driving a dildo shaped car.
omgwtfbyobbq is offline   Reply With Quote
Old 07-08-2007, 03:40 PM   #4
...
 
Join Date: May 2007
Posts: 425
Country: United States
What were the wind conditions ? same/same for each trip?

Isn't the lower grill area also part of the air intake for the Weber-nator ? That may 'splain it !
MnFocus is offline   Reply With Quote
Old 07-08-2007, 05:21 PM   #5
Registered Member
 
brucepick's Avatar
 
Join Date: Feb 2007
Posts: 722
Country: United States
Location: Connecticut
Did you block off the source of combustion air for intake?
Sorry I don't remember your intake setup but if it's pulling from the engine bay then ... you get my drift.
__________________
Currently getting +/- 50 mpg in fall weather. EPA is 31/39 so not too shabby. WAI, fuel cutoff switch, full belly pan, smooth wheel covers.

Now driving '97 Civic HX; tires ~ 50 psi. '89 Volvo 240 = semi-retired.
brucepick is offline   Reply With Quote
Old 07-08-2007, 05:29 PM   #6
...
 
Join Date: May 2007
Posts: 425
Country: United States
iirc Bruce his air intake is coming from the passenger side fenderwell which is behind the headlight . Hey kitcar ? do you still have the clear tape on the body seams ? Bruce may be on to something ...
MnFocus is offline   Reply With Quote
Old 07-08-2007, 05:32 PM   #7
|V3|2D
 
thisisntjared's Avatar
 
Join Date: Mar 2006
Posts: 1,186
Country: United States
Send a message via AIM to thisisntjared
you have a scan gauge right?
__________________
don't waste your time or time will waste you
thisisntjared is offline   Reply With Quote
Old 07-13-2007, 01:54 AM   #8
Registered Member
 
Join Date: May 2007
Posts: 163
Country: United States
More data:

Approx. 1400 feet above sea level
Air Temp, 87 degrees
Humidity 57%
Barometric pressure was 1013.9 mb
Winds 10 mph SSW, variable
Coolant temp, 201 degrees (both tests)
Timing, 6 to -2 degrees (both tests)
Engine load with entire lower grill blocked, 23% @ 55 mph, level
Engine load with partial block, 20% @ 55 mph, level

Intake is through the passenger side fender via the wheel well; air flow and intake pressure unchanged as was the coolant temp. Vehicle closed loop for entire test.

Maximum speed, 55 mph
__________________

__________________


Proud owner of Stinkerbutt!
[SIGPIC][/SIGPIC]
-Air Raid cone filter, direct to TB
-Homebrew front air dam
-Homebrew side skirt
-Torza top bed cover
-Now featuring front wheel canards!
kitcar is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
View model averages? unicrombie Fuelly Web Support and Community News 4 11-09-2011 06:32 AM
The VX for Sale XFi For Sale 12 04-15-2007 12:02 PM
HF to SI tranny swap complete, questions about tire size... white90crxhf General Fuel Topics 1 08-20-2006 06:46 PM
Gas Log? GasSavers_Kraig General Discussion (Off-Topic) 3 08-16-2006 01:21 AM
Toyota Grand Prius krousdb Automotive News, Articles and Products 5 07-26-2006 02:44 PM

Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 09:35 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.