Shop Vac and a Thread - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 04-24-2007, 11:09 PM   #1
Registered Member
 
Join Date: Mar 2007
Posts: 191
Country: United States
Shop Vac and a Thread

Playing around with fans and blowers and yarn and such, I found that a long piece of thread inside the blowing end (reverse) of a shop vac gives somewhat of an idea on aerodynamic shapes around the car.

The thread can't be too long.... 3-4 feet or so... and there is some turbulance from the vac... but pointing the contraption at things like the mirror or the cowl gives an idea of what is going on there.

BTW, I did this a week or so ago and was not too sure of the hood result.... it seemed the airflow was center out quite a bit. But today I saw the same thing on the freeway with yarn taped to the hood.

Simple... not too precise... but when you see that thread sucked right into the cowl or that nice taper around the mirror followed by the nasty turbulance right behind it.... I think it provides some cheap and easy insight.
__________________

lca13 is offline   Reply With Quote
Old 04-25-2007, 01:33 AM   #2
Registered Member
 
JanGeo's Avatar
 
Join Date: Jan 2006
Posts: 2,444
Country: United States
Location: Tiverton, RI
Send a message via Yahoo to JanGeo
Brilliant idea!!! smoke trail without smoke!! great way to test an Airtab!!!
__________________

JanGeo is offline   Reply With Quote
Old 04-25-2007, 05:04 AM   #3
Registered Member
 
Join Date: Mar 2007
Posts: 1,138
Country: United States
If, for some crazy reason, you want to try to smooth out the airstream some, you can bundle together soda straws and blow the air through them. That should give you a less turbulent stream of air. But, it may cut down on the flow too much.

I have a leaf blower here that I have thought about using to do the same thing you did with the shopvac. I am glad to hear that it seems to work.

Did you use a thin piece of thread or a piece of yarn?
__________________
Bill in Houston is offline   Reply With Quote
Old 04-25-2007, 06:16 AM   #4
Registered Member
 
Join Date: Mar 2007
Posts: 191
Country: United States
Yeah I read about the tube approach.... might consider it, but after I think hard about buying a super high power vac :-) Or I might check out my leaf blower too.... thanks for the reminder.

Thread at first, by accident, because the craft store was closed and KMart did not carry yarn. Then I tried the yarn, but it turned out too heavy and I went back to the thread
lca13 is offline   Reply With Quote
Old 04-25-2007, 06:36 AM   #5
Registered Member
 
JanGeo's Avatar
 
Join Date: Jan 2006
Posts: 2,444
Country: United States
Location: Tiverton, RI
Send a message via Yahoo to JanGeo
Hey leaf blower great idea I have one of those too and it is variable so you can test at different wind speeds. We used to have a big squirrel cage blower that put out 60 mph wind in a 2 square foot duct that would work pretty good too - could do the entire front end at a lower speed maybe 20mph by the time it was spread out.
JanGeo is offline   Reply With Quote
Old 04-25-2007, 06:48 AM   #6
Registered Member
 
Join Date: Mar 2007
Posts: 1,138
Country: United States
Quote:
Originally Posted by lca13 View Post
Then I tried the yarn, but it turned out too heavy and I went back to the thread
Cool, I was wondering about yarn being too heavy...
__________________
Bill in Houston is offline   Reply With Quote
Old 04-25-2007, 07:01 AM   #7
Registered Member
 
brucepick's Avatar
 
Join Date: Feb 2007
Posts: 722
Country: United States
Location: Connecticut
Interesting thread...
__________________
Currently getting +/- 50 mpg in fall weather. EPA is 31/39 so not too shabby. WAI, fuel cutoff switch, full belly pan, smooth wheel covers.

Now driving '97 Civic HX; tires ~ 50 psi. '89 Volvo 240 = semi-retired.
brucepick is offline   Reply With Quote
Old 12-21-2007, 03:28 PM   #8
Registered Member
 
Join Date: Dec 2007
Posts: 28
Country: United States
I have a leaf blower that I was just about to power a skateboard with. I'm going to do this, and post pics...
edenstrang is offline   Reply With Quote
Old 12-21-2007, 03:36 PM   #9
Registered Member
 
skewbe's Avatar
 
Join Date: Jan 2007
Posts: 771
Country: United States
LOL, like jet powered? Dont forget the afterburner
__________________
Standard Disclaimer
skewbe is offline   Reply With Quote
Old 12-23-2007, 11:15 AM   #10
Registered Member
 
Join Date: Dec 2007
Posts: 28
Country: United States
HAH! no!.. like geared to a wheel... Although the guy with the skateboarding speed record at bonneville (????) used a pulse-jet...

I'm building a powered skateboard to end them all... every powered skateboard up to this point has been bogus. I'm thinking less "powered skateboard," more "stand-up motorcycle." Fully suspended, with mechanically articulated steering. Another topic entirely, just... explaining.
__________________

edenstrang is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Fuelly iOS Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 02:33 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.