Few questions for easy, $0.00 modifications - Page 4 - Fuelly Forums

Click here to see important news regarding the aCar App

Go Back   Fuelly Forums > Fuel Talk > General Fuel Topics
Today's Posts Search Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 05-01-2008, 05:33 AM   #31
Registered Member
 
palemelanesian's Avatar
 
Join Date: Apr 2013
Posts: 364
Country: United States
Quote:
Originally Posted by FLAteam View Post
-Engine off Neutral (on my automatic!) twice. It was kinda scary. Found out I don't have power steering. Seemed to help, but not much more than engine on Neutral (but I wouldn't know...my speedometer was at 0 and I don't have a Scangauge).
You should turn the key back to the ON position as soon as the engine stops! That's very unsafe not to! Your ABS, airbags, and any other electrical systems are turned off at that time! Besides, you're not registering any of the miles traveled, so your numbers aren't reflecting reality.
__________________

palemelanesian is offline   Reply With Quote
Old 05-01-2008, 05:43 AM   #32
Registered Member
 
Mr. Pig's Avatar
 
Join Date: Jul 2007
Posts: 46
Country: United States
In my Cavalier, per my ScanGuageII, when coasting in drive at around 55mph I see around 55-60 mpg, if I pop it in neutral I see around 125-130 mpg. I'm having trouble understanding how the fuel cutoff could be using zero fuel. If there was no fuel at all, the engine would die and effectively have to be bump started to get going again, which isn't possible in an auto. Perhaps it is just cutting fuel to a point that it is running super lean? Or is my GM vehicle just not the norm?
__________________

__________________
Mr. Pig is offline   Reply With Quote
Old 05-01-2008, 06:09 AM   #33
Registered Member
 
palemelanesian's Avatar
 
Join Date: Apr 2013
Posts: 364
Country: United States
The Scangauge is likely not reporting it correctly. It's only guessing - there's no code in the OBD-II protocol for fuel cut. It just guesses by the light load and rpm.
If it's in gear, your car's momentum is driving the wheels, which in turn are rotating the engine. That's how it stays turning with no fuel. If you're in neutral, the engine will require fuel to keep running, so there's no fuel cutoff in that case.
palemelanesian is offline   Reply With Quote
Old 05-01-2008, 08:17 AM   #34
Registered Member
 
theholycow's Avatar
 
Join Date: Apr 2008
Posts: 6,624
Country: United States
Send a message via ICQ to theholycow Send a message via AIM to theholycow Send a message via MSN to theholycow Send a message via Yahoo to theholycow
Quote:
Originally Posted by Mr. Pig View Post
In my Cavalier, per my ScanGuageII, when coasting in drive at around 55mph I see around 55-60 mpg, if I pop it in neutral I see around 125-130 mpg. I'm having trouble understanding how the fuel cutoff could be using zero fuel. If there was no fuel at all, the engine would die and effectively have to be bump started to get going again, which isn't possible in an auto. Perhaps it is just cutting fuel to a point that it is running super lean? Or is my GM vehicle just not the norm?
What was the tachometer reading?

If it's still in gear and the wheels are turning the halfshafts are turning the diff is turning the driveshaft is turning the transmission is turning the crankshaft, what's the problem with reducing the fuel until zero fuel is injected? As long as fuel is resumed before the RPM drops below idle speed, no restarting will be required.

A Cavalier isn't exactly the showcase of all the latest in modern technology; I suppose it's possible that it might not support DFCO, though I'd guess that it's more likely that it just wasn't revving high enough. 1000 rpm is the number everyone says for DFCO and it's definitely the borderline point for my VW, but I'm not sure that it's the same in all vehicles.

Pale: I hope your guess is wrong. I am planning to buy a SG and I'm counting on it being able to report actual fuel consumption volume. If it can't, I need to come up with some other gauge to do it.
__________________
This sig may return, some day.
theholycow is offline   Reply With Quote
Old 05-01-2008, 09:36 AM   #35
Registered Member
 
palemelanesian's Avatar
 
Join Date: Apr 2013
Posts: 364
Country: United States
Test for DFCO: Do a controlled coast-down in gear with the engine on. Mark the distance/time results. Do it again in gear with the engine turned off. If the results are similar, you have DFCO. If the engine-on coasts longer/farther, you don't.
palemelanesian is offline   Reply With Quote
Old 05-01-2008, 09:47 AM   #36
Registered Member
 
GasSavers_RoadWarrior's Avatar
 
Join Date: Feb 2008
Posts: 1,652
Ford EEC computers are meant to do it down to 1800 rpm on auto transmissions, I guess that's about where the transmission stops driving the motor.
__________________
I remember The RoadWarrior..To understand who he was, you have to go back to another time..the world was powered by the black fuel & the desert sprouted great cities..Gone now, swept away..two mighty warrior tribes went to war & touched off a blaze which engulfed them all. Without fuel, they were nothing..thundering machines sputtered & stopped..Only those mobile enough to scavenge, brutal enough to pillage would survive. The gangs took over the highways, ready to wage war for a tank of juice
GasSavers_RoadWarrior is offline   Reply With Quote
Old 05-01-2008, 09:59 AM   #37
Registered Member
 
theholycow's Avatar
 
Join Date: Apr 2008
Posts: 6,624
Country: United States
Send a message via ICQ to theholycow Send a message via AIM to theholycow Send a message via MSN to theholycow Send a message via Yahoo to theholycow
1800 is pretty high for DFCO to quit.

Mmmmm.....1800.....
__________________
This sig may return, some day.
theholycow is offline   Reply With Quote
Old 05-01-2008, 08:49 PM   #38
Registered Member
 
Join Date: Apr 2008
Posts: 71
Country: United States
well, I just filled up 10 gallons and got around 35.5 mpg. However, i filled it up super-slowly...so maybe next time it'll be higher.
__________________
FLAteam is offline   Reply With Quote
Old 05-02-2008, 08:21 AM   #39
Registered Member
 
theholycow's Avatar
 
Join Date: Apr 2008
Posts: 6,624
Country: United States
Send a message via ICQ to theholycow Send a message via AIM to theholycow Send a message via MSN to theholycow Send a message via Yahoo to theholycow
I found a free mod that is very easy and might help hypermilers with automatic transmissions. The link is about tuning for racing, but the same mod can be applied to us with one minor change:
http://www.autospeed.com/cms/A_1304/article.html

It says to adjust the cable so that your transmission will be more responsive, downshifting with less gas pedal input. However, if you adjust it in the other direction, you'll be able to use larger throttle opening at lower RPM.
__________________

__________________
This sig may return, some day.
theholycow is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I turn the graphs on? jgh Fuelly Web Support and Community News 1 10-13-2013 11:08 PM
89 - 91 CRX HF 8 valve SOHC D15B6 Honda 1.5L eng - $100 UfoTofU For Sale 1 12-01-2006 11:07 PM

» Fuelly iOS Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.