Finally did the seafoam treatment... :-) - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 12-23-2007, 08:53 PM   #1
Registered Member
 
rvanengen's Avatar
 
Join Date: Apr 2007
Posts: 230
Country: United States
Finally did the seafoam treatment... :-)

Car was taking about 1.5 to 2.0 seconds of cranking to get started with a bit of a skip at idle, so I finally pulled a vacuum line off the front and one on the rear...poured about 1/3 of a can in each, and then the remainder down the throttle body. Let the car sit for about 10 minutes and fired it up...

A couple cars stopped to check to see if my car was on fire due to the HUGE clouds of smoke (white and blackish). Took it out for the requested "spirited" drive and it now starts almost immediately and runs a LOT smoother at idle. It "seems" a bit more responsive driving, but that could just be wishful thinking.

My son really enjoyed the drive...and the smoke! :-)
__________________

__________________
-- Randall


McIntyre's First Law: "Under the right circumstances, anything I tell you may be wrong."

O'Brien's First Corollary to McIntyre's First Law: "I don't know what the right circumstances are, either."



rvanengen is offline   Reply With Quote
Old 12-24-2007, 03:14 AM   #2
Registered Member
 
Join Date: Apr 2007
Posts: 290
Country: United States
I am guessing that this was done for the Mercedez? The Mercury seems a bit young to get the seafoam treatment. Glad to hear that it worked for you though.
__________________

Erdrick is offline   Reply With Quote
Old 12-24-2007, 07:57 AM   #3
Registered Member
 
rvanengen's Avatar
 
Join Date: Apr 2007
Posts: 230
Country: United States
Ooops...yup...it was the old 190...although it only has 107k on the clock so far...but I am guessing that all the sitting and short drives gave it a bit of carbon and gunk buildup! Wish I had done this several months ago, but it will be interesting to see if there is any difference in FE on the next tank...don't want to compare on this tank since it was driven VERY spiritedly for a while. Fun, yes...FE, no.
__________________
-- Randall


McIntyre's First Law: "Under the right circumstances, anything I tell you may be wrong."

O'Brien's First Corollary to McIntyre's First Law: "I don't know what the right circumstances are, either."



rvanengen is offline   Reply With Quote
Old 12-24-2007, 12:33 PM   #4
Registered Member
 
unstable bob's Avatar
 
Join Date: Jul 2007
Posts: 158
Country: United States
Send a message via AIM to unstable bob
Talking

The schmokin' is the best part of the whole deal!
__________________
unstable bob gable
AMERICAN ROAD WARRIOR!

www.unstablebobgable.com

1973 AMC AMX: The beauty
1987 Buick T-Type: The beast
2004 Cavalier: The MPG machine
unstable bob is offline   Reply With Quote
Old 12-24-2007, 04:13 PM   #5
Registered Member
 
VetteOwner's Avatar
 
Join Date: Mar 2007
Posts: 1,546
Country: United States
hehe yea. wonderful stuff IMO
VetteOwner is offline   Reply With Quote
Old 12-24-2007, 05:38 PM   #6
Registered Member
 
kamesama980's Avatar
 
Join Date: Nov 2007
Posts: 742
Country: United States
Location: Columbus, IN, USA
Send a message via AIM to kamesama980 Send a message via Yahoo to kamesama980
yep, done it a few times. always helps.
__________________
-Russell
1991 Toyota Pickup 22R-E 2.4 I4/5 speed
1990 Toyota Cressida 7M-GE 3.0 I6/5-speed manual
mechanic, carpenter, stagehand, rigger, and know-it-all smartass
"You don't get to judge me for how I fix what you break"
kamesama980 is offline   Reply With Quote
Old 12-26-2007, 04:11 AM   #7
Registered Member
 
ma4t's Avatar
 
Join Date: Jun 2007
Posts: 175
Country: United States
I'm at about 90k in my Mazda. I'm looking into this now. Sounds like fun!

M
__________________
ma4t is offline   Reply With Quote
Old 12-26-2007, 11:14 AM   #8
Registered Member
 
kamesama980's Avatar
 
Join Date: Nov 2007
Posts: 742
Country: United States
Location: Columbus, IN, USA
Send a message via AIM to kamesama980 Send a message via Yahoo to kamesama980
Quote:
Originally Posted by ma4t View Post
I'm at about 90k in my Mazda. I'm looking into this now. Sounds like fun!

M
Look into the manifold. if it's gummy and nasty, go ahead. if it's cleanish, don't worry too much about it. IMO the best way to introduce it if you don't want it soaking the valve seals (which BTW you will have to do more than once because not all the valves will close to soak at once) is find either the EGR or charcoal canister vacuum hoses, they should be routed to the throttle plate and stick those into the bottle of seafoam so A. you have to open the throttle plate and B. vacuum sucks it in and airflow past the throttle plate pretty much atomizes and scatters the seafoam evenly. this is a lot easier in older engines that aren't covered in plastic and all the hoses are buried/hidden
__________________
-Russell
1991 Toyota Pickup 22R-E 2.4 I4/5 speed
1990 Toyota Cressida 7M-GE 3.0 I6/5-speed manual
mechanic, carpenter, stagehand, rigger, and know-it-all smartass
"You don't get to judge me for how I fix what you break"
kamesama980 is offline   Reply With Quote
Old 12-26-2007, 12:57 PM   #9
Registered Member
 
VetteOwner's Avatar
 
Join Date: Mar 2007
Posts: 1,546
Country: United States
or usualyl the big brake booster vacum lien is fed off the manifold
VetteOwner is offline   Reply With Quote
Old 12-26-2007, 08:48 PM   #10
Registered Member
 
kamesama980's Avatar
 
Join Date: Nov 2007
Posts: 742
Country: United States
Location: Columbus, IN, USA
Send a message via AIM to kamesama980 Send a message via Yahoo to kamesama980
Quote:
Originally Posted by VetteOwner View Post
or usualyl the big brake booster vacum lien is fed off the manifold
Depends on the engine. I like the vacuum hose I mentioned above because it's centrally located and has LOTS of air velocity to scatter and atomize. If I dumped it in my brake booster hose, I'd get it all in cylinder 6 and some in 5. like I said, best place totally depends on the engine.

Notice my beautifully designed intake manifold...
http://s29.photobucket.com/albums/c2...t=RIMG0014.jpg
__________________

__________________
-Russell
1991 Toyota Pickup 22R-E 2.4 I4/5 speed
1990 Toyota Cressida 7M-GE 3.0 I6/5-speed manual
mechanic, carpenter, stagehand, rigger, and know-it-all smartass
"You don't get to judge me for how I fix what you break"
kamesama980 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Query with fill ups Dukey Fuelly Web Support and Community News 3 04-09-2010 01:27 AM
Full tank of fuel or not? elvyn General Fuel Topics 9 03-24-2010 10:53 PM
Supermid M1 install in 88-91 crx 88HF Experiments, Modifications and DIY 13 03-09-2008 04:56 PM
deep cycle battery for starting a metro? skewbe General Maintenance and Repair 9 08-12-2007 01:12 PM
Engine Temp vs MPG JanGeo General Fuel Topics 7 05-12-2006 09:16 PM

» Fuelly iOS Apps
No Threads to Display.
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 10:51 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.