Peakster's Scanguage is in! - Page 2 - Fuelly Forums

Click here to see important news regarding the aCar App

Go Back   Fuelly Forums > Fuel Talk > General Fuel Topics
Today's Posts Search Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 12-13-2006, 03:17 AM   #11
Registered Member
 
Join Date: Oct 2006
Posts: 245
Country: United States
Quote:
Originally Posted by Peakster
Ok. Another question:

When my car is fully warmed up and it idling at a stop, my RPM reads around 750-800rpm which turns out to be a refreshing 0.1Gallons/Hour.
However, whenever the car is in motion, say 30mph, when I push in the clutch the car likes to idle around 1250 RPM instead which translates to 0.2Gallons/Hour.

Why doesn't the engine idle at the 750-800 range when the car is in motion? It would be nice to have that 0.1GPH while coasting. Is there a way to change the idle speed? Or is there a good reason why it idles at 1250RPM?
I think it something to do with manual trans. the computer thinks you might go back into gear while still moving.
__________________

__________________
"Sylvie" 2000 Honda Insight 5 Speed


LxMike is offline   Reply With Quote
Old 12-14-2006, 11:00 AM   #12
Registered Member
 
Peakster's Avatar
 
Join Date: Sep 2006
Posts: 467
Country: United States
Wink Mph is like the big bully for Gph

Ok. So here's the preliminary fuel usage for my Geo via information of the SG:

Warm idle when stopped: 0.1gph (very rare sight. 0mpg nonetheless)
Warm idle while coasting: 0.2gph (usually well over 100mpg)
Very cold idle: 0.3gph
30mph in 4th gear or 35mph in 5th gear: 0.4gph (75-87mpg)
45mph in 5th gear: 0.7-0.8gph (56-64mpg)
50mph in 5th gear: 1.0gph (50mpg)
50mph uphill climbing in 5th gear with gas pinned: 1.8gph (28mpg)

So basically in simplest form, to improve FE I need to somehow decrease my gph consumption while still maintaining high mph.

The mph is like the overweight kid that can't move on it's own (unless it's downhill ) while the gph has to tote the heavy mph around. You can get good FE by getting the gph to bring mph up to speed and then giving gph a break... but slowly the annoying mph loses momentum and the gph has to go to work again.

gph: "Oh no! not another hill! For heaven's sake mph, lose some weight!"
__________________

Peakster is offline   Reply With Quote
Old 12-14-2006, 12:01 PM   #13
Registered Member
 
zpiloto's Avatar
 
Join Date: Mar 2006
Posts: 1,225
Country: United States
Quote:
Originally Posted by Peakster
Ok. So here's the preliminary fuel usage for my Geo via information of the SG:

Warm idle when stopped: 1gph (very rare sight. 0mpg nonetheless)
Warm idle while coasting: 2gph (usually well over 100mpg)
Very cold idle: 3gph
30mph in 4th gear or 35mph in 5th gear: 4gph (75-87mpg)
45mph in 5th gear: 0.7-0.8gph (56-64mpg)
50mph in 5th gear: 1.0gph (50mpg)
50mph uphill climbing in 5th gear with gas pinned: 1.8gph (28mpg)

So basically in simplest form, to improve FE I need to somehow decrease my gph consumption while still maintaining high mph.

The mph is like the overweight kid that can't move on it's own (unless it's downhill ) while the gph has to tote the heavy mph around. You can get good FE by getting the gph to bring mph up to speed and then giving gph a break... but slowly the annoying mph loses momentum and the gph has to go to work again.

gph: "Oh no! not another hill! For heaven's sake mph, lose some weight!"
Did you forget the decimal point for the idles? Shouldn't it be .1 and .2 GPH?
Looks like you want to plan your routes to be somewhere around 30-40 MPH
zpiloto is offline   Reply With Quote
Old 12-14-2006, 12:05 PM   #14
Registered Member
 
Peakster's Avatar
 
Join Date: Sep 2006
Posts: 467
Country: United States
Quote:
Originally Posted by zpiloto
Shouldn't it be .1 and .2 GPH?
Whoops. You're completely correct. It's now edited.

Quote:
Originally Posted by zpiloto
Looks like you want to plan your routes to be somewhere around 30-40 MPH
Yes, that would be optimum. I'm now totally avoiding the freeway (unless it's at night where I can get away with driving 40mph). The only downside to the city driving is the stop and go. I'm not too sure if the 1 or 2 city blocks of CODFISHing in my car is enough to offset the horrible FE my car gets when accelerating from a stoplight. My city is completely flat, so Fas'ing isn't really ultra-effective anywhere.
Peakster is offline   Reply With Quote
Old 12-14-2006, 12:22 PM   #15
Registered Member
 
zpiloto's Avatar
 
Join Date: Mar 2006
Posts: 1,225
Country: United States
Peakster. I was looking at your garage and you say that you have a EBH but don't use it. Why? It should make a pretty big difference especially where you are located.
zpiloto is offline   Reply With Quote
Old 12-14-2006, 12:33 PM   #16
Registered Member
 
Peakster's Avatar
 
Join Date: Sep 2006
Posts: 467
Country: United States
Quote:
Originally Posted by zpiloto
Peakster I was looking at your garage and you say that you have a EBH but don't use it. Why? It should make a pretty big difference especially where you are located.
I usually park in an insulated/heated garage when I get the chance. Right now, the Geo is parked on the street (didn't want to wake family with garage door), but there is a silly bylaw in Regina that states that no extension-cords can cross the sidewalk. Plus I've driven off WAY too many times with them still connected!
Peakster is offline   Reply With Quote
Old 12-14-2006, 12:36 PM   #17
Registered Member
 
zpiloto's Avatar
 
Join Date: Mar 2006
Posts: 1,225
Country: United States
Ouch. Just cover it in the snow
__________________

zpiloto is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
City vs Highway Chart waterboysh Fuelly Web Support and Community News 2 03-07-2013 10:48 PM
Suggested improvement to distribution graphic cmumford Fuelly Web Support and Community News 4 03-19-2012 11:17 PM
Old school cylinder deactivation MetroMPG General Fuel Topics 11 06-09-2006 06:29 AM
WAI revisited. zpiloto General Fuel Topics 14 05-16-2006 03:08 PM
Water Fuel System diamondlarry General Fuel Topics 0 11-14-2005 12:20 PM

» Fuelly Android Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 07:30 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.