Questions about devac-ing a 87 CRX

[Jonathan6229]

Originally Posted by Erik

It is really good that you are using the HF transmission.

You will also need the HF wiring harness, HF distributor, alternator control box, barometric pressure sensor, HF speedometer (the HF ECU needs a VSS signal) and and spark timing control box to make the HF emissions system work correctly.

If this is a DX, it would probably be much easier to just find/install a 1.3 carb.

Bump,
Rather than try and find all 1.5L HF parts, (Dizzy, speedo, ATL control box, and spark timing box,) I'd like to set up a Devac'd 1.3L carb, HF head, and HF tranny.

So if I had 1.3L carb, do I need the HF EGR? as you have it labled on RPR? (Devac Write Up. - Page 6 - Carbs - Red Pepper Racing - Page 6)
or any other HF parts?
Because I'm thinking that I'm just going to copy what you did there...

[GasSavers_Erik]

The regular, non-HF EGR valve will work fine.