smooth wheels/hub caps = MPG increase? - Fuelly Forums

Click here to see important news regarding the aCar App

Go Back   Fuelly Forums > Fuel Talk > General Fuel Topics
Today's Posts Search Click Here to Login
Reply
 
Thread Tools Display Modes
 
Old 02-27-2008, 09:36 PM   #1
Registered Member
 
Join Date: Aug 2006
Posts: 171
Country: United States
Send a message via AIM to Brian D.
smooth wheels/hub caps = MPG increase?

I'm looking to hear from anyone who has kept THE SAME tire size, but either added smooth (plate/dish-like) hub caps to the wheels OR found the same smooth type of wheel to replace their pre-existing ones. I would like to know if this change resulted in increased MPGs.

I swapped my stock CRX HF (steelies) rims for a set of those superlight Mazda Miata BBS (mesh-style) rims. The BBS are in NO way a smooth pattern; they probably stir up all kinds of turbulence. Although I love the look of the rims, they (along with their somewhat LRR & lighweight tires) didn't boost my fuel economy. Now, I don't know if there's a chance that any gain may have been offset by the fact that the wheels are not as smoothly patterned as the stock steel HF rims. I do know that I'd just like to hear from anyone who HAS deliberately swapped to a smoother wheel pattern...and whether or not they experienced a gain/loss in FE. Thanks a bunch for any/all info.
__________________

__________________
GAS GSLR
Brian D. is offline   Reply With Quote
Old 02-28-2008, 05:29 AM   #2
Registered Member
 
Join Date: Oct 2005
Posts: 682
Country: United States
Try googling "Baby Moon" hubcaps. They are aerodynamic, originally deigned for racing.
__________________

__________________
Capitalism: The cream rises. Socialism: The scum rises.
Sludgy is offline   Reply With Quote
Old 02-28-2008, 05:57 AM   #3
Registered Member
 
GasSavers_RoadWarrior's Avatar
 
Join Date: Feb 2008
Posts: 1,652
Take a look at this post...
http://www.gassavers.org/showpost.ph...99&postcount=2
in the image you can read...
"We also tested the moon discs which reduced drag by two to four counts. The farther the wheels are from the outer edge of the fender, the less the discs matter."
__________________
I remember The RoadWarrior..To understand who he was, you have to go back to another time..the world was powered by the black fuel & the desert sprouted great cities..Gone now, swept away..two mighty warrior tribes went to war & touched off a blaze which engulfed them all. Without fuel, they were nothing..thundering machines sputtered & stopped..Only those mobile enough to scavenge, brutal enough to pillage would survive. The gangs took over the highways, ready to wage war for a tank of juice
GasSavers_RoadWarrior is offline   Reply With Quote
Old 02-28-2008, 06:58 AM   #4
Registered Member
 
lunarhighway's Avatar
 
Join Date: Dec 2006
Posts: 360
Country: United States
this is what i've put on since a couple of days they came from my dad's old ascona that's due for the scrapheap.



don't know if they're helping... the car feels a little different but that might just be from the extra weight or because i know they're on.

they don't inhibit cooling if that should be an issue but they're pretty clean otherwise... they also make car car look more modern than it is
__________________

lunarhighway is offline   Reply With Quote
Old 02-28-2008, 07:42 AM   #5
Registered Member
 
GasSavers_Ryland's Avatar
 
Join Date: Mar 2006
Posts: 1,325
Country: United States
Send a message via AIM to GasSavers_Ryland
Any chance to put those stock HF steel wheels on a scale and compare them to the alloy wheels you have?
GasSavers_Ryland is offline   Reply With Quote
Old 02-28-2008, 09:43 AM   #6
Registered Member
 
Join Date: Aug 2006
Posts: 171
Country: United States
Send a message via AIM to Brian D.
Sure...

I actually did put them on a scale. The stock HF wheels are 13" X (4.5?)"...anyway, they weight in at just a hair over 13LBS., if memory serves. (I will weigh them again both with and without the little "H" caps).

As for the Miata BBS rims, they're definitely lighter, by 3LBS or so...and larger too. The Miata rims are 14" X 6"...and the tires I got for them were Nokian's that came off of a Prius The tires are 175/65/14's that are even lighter than the tires that were on the HF steel wheels. I did my homework on this swap! The Nokians can also handle 50psi, no problem -(not that I wasn't already doing that with the Aquatred-3's that were on the HF wheels...I was!).
__________________
GAS GSLR
Brian D. is offline   Reply With Quote
Old 02-28-2008, 09:54 AM   #7
Registered Member
 
Join Date: Aug 2006
Posts: 171
Country: United States
Send a message via AIM to Brian D.
Road Warrior, thanks for that link/article. I sure hate it when good looks pose a threat to FE. Well, I suppose in order to find out whether or not my new, lighter wheel/tire combination had a net ZERO effect on gas mileage (i.e., lighter overall combination with possible aerodynamic drag = no FE change?), I'd have to find a different wheel/tire combination of equal weight, but WITH a smooth flowing pattern (and keep certain that they remain an equal distance from the wheelwell when mounted on the car). That should tell the tale. **OF course, there's always the chance that dropping a few LBS from the (front/ FWD) rotating masses just HAS NO change with this car...as the OEM wheel/tire combination was not a tremendous amount heavier.
__________________
GAS GSLR
Brian D. is offline   Reply With Quote
Old 02-28-2008, 10:24 AM   #8
Supporting Member
 
cfg83's Avatar
 
Join Date: Sep 2006
Posts: 1,779
Country: United States
Sludgy -

Quote:
Originally Posted by Sludgy View Post
Try googling "Baby Moon" hubcaps. They are aerodynamic, originally deigned for racing.
I used to google that, but "racing disk" is probably better. This ain't cheap, but these are the real deal :

Moon Discs
https://www.mooneyesusa.com/Store/in...2de15d5fb11671

CarloSW2
__________________
Old School SW2 EPA ... New School Civic EPA :

What's your EPA MPG? https://www.fueleconomy.gov/feg/calculatorSelectYear.jsp
cfg83 is offline   Reply With Quote
Old 02-28-2008, 07:51 PM   #9
DRW
Registered Member
 
Join Date: Oct 2006
Posts: 615
Country: United States
Since you have lighter wheels/tires, have you tried shifting gears at lower rpms? The ligher wheel/tires should let the car accellerate easier.
I've noticed a slight difference when I installed a lighter flywheel on my car.
__________________
Dave W.
DRW is offline   Reply With Quote
Old 02-28-2008, 08:10 PM   #10
Registered Member
 
VetteOwner's Avatar
 
Join Date: Mar 2007
Posts: 1,546
Country: United States
Quote:
Originally Posted by DRW View Post
Since you have lighter wheels/tires, have you tried shifting gears at lower rpms? The ligher wheel/tires should let the car accellerate easier.
I've noticed a slight difference when I installed a lighter flywheel on my car.
prolly lost a bit of torque in swaping flys tho...
should rev faster and slow down faster but torque is lost

oh my chevette i have almost baby moon hubcaps and then i have the stock windmills. it doesnt make a difference either way. of course the cars high up and lot of frontal tire space, but also very skinny frontal tire space...
__________________

VetteOwner is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Not very precise mpg calculation larjerr Fuelly Web Support and Community News 4 08-20-2012 01:03 AM
Keeping my distance in traffic khurt General Fuel Topics 8 09-07-2008 03:23 AM
Bought new BFGoodrich Long Trail T/A Tires Bill in Houston General Fuel Topics 0 06-29-2007 12:56 PM
It seems everybody is going WOT Silveredwings General Maintenance and Repair 11 06-18-2007 12:51 PM
Electrical power and cars. DracoFelis Automotive News, Articles and Products 2 09-16-2006 01:31 PM

» Fuelly Android Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 10:13 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.