Fuelly Forums - DIY: Installing a Front Camber Kit (CRX but applicable to most Hondas)

Fuelly Forums (https://www.fuelly.com/forums/)

- Experiments, Modifications and DIY (https://www.fuelly.com/forums/f9/)

- - DIY: Installing a Front Camber Kit (CRX but applicable to most Hondas) (https://www.fuelly.com/forums/f9/diy-installing-a-front-camber-kit-crx-but-applicable-to-most-hondas-1785.html)

SVOboy

03-13-2006 07:50 AM

DIY: Installing a Front Camber Kit (CRX but applicable to most Hondas)

Edit: dead pictures, will fix at some point.

krousdb

03-13-2006 10:02 AM

Thanks for the DIY. It

Thanks for the DIY. It might come in handy should I go that route. At 1.75" drop, my camber is not that bad, although out of spec. It does not Irk me however and my traction is greatly improved. I will do this should the tire wear becomes noticeable.

krousdb

03-13-2006 10:04 AM

Re: DIY: Installing a Front Camber Kit (CRX but applicable to mo

Quote:

Originally Posted by SVOboy

5. First thing for actual work is to try on one of your new wheels and look at how pretty it is, my, it is pretty. :)

Yes, very pretty. Will mine be that pretty? :)

SVOboy

03-13-2006 10:12 AM

It only irks me because mine

It only irks me because mine have huge amounts of camber and it's just not fun to look at, :p

I plan on leaving like 1 degree of camber to help with cornering, cuz cornering like camber.

Quote:

Yes, very pretty. Will mine be that pretty? Smiling

If you want the fx rims I should say so, the insight stuff is a little fugly to me, and big. I need to get the car running so I can have my rims put on in the first place, :)

All times are GMT -8. The time now is 03:45 PM.