HPV Fairing Construction - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 03-27-2007, 09:58 PM   #1
Registered Member
 
trebuchet03's Avatar
 
Join Date: Mar 2007
Posts: 812
Country: United States
Send a message via AIM to trebuchet03
HPV Fairing Construction

Some of you may be interested in this - I stumbled upon this website as I'm in the midst of working on some aero modifications for my car.
------
We're building a tool to make a fairing for a tadpole trike. I've been documenting progress Here. And will be publishing more within the next few days (about 14 hours of video to edit).

Here's Just the Video: Google Video

While it's not a complete micromanaged step by step handbook, it gives you an idea of one method to make an HPV fairing. We're cutting a lot of corners because of budget (the budget is small relative to teams that spend $40K+) My avatar is last year's design. To answer a question I get all the time, this is the entry for the University of Central Florida (UCF) in the ASME HPV Challenge in early May.

I'm open for questions and feedback Criticism is always welcomed too.
__________________

__________________
Time is the best teacher. Unfortunately it kills all its students.


Bike Miles (Begin Aug. 20 - '07): ~433.2 miles

11/12
trebuchet03 is offline   Reply With Quote
Old 03-28-2007, 05:20 AM   #2
Registered Member
 
Join Date: Apr 2006
Posts: 49
Country: United States
Interesting project, glad to know what you are doing and how you are doing it. Keep us posted!
__________________

WisJim is offline   Reply With Quote
Old 03-28-2007, 06:19 PM   #3
Supporting Member
 
Hockey4mnhs's Avatar
 
Join Date: Dec 2006
Posts: 760
Country: United States
sweet
__________________
Hockey4mnhs is offline   Reply With Quote
Old 03-28-2007, 09:47 PM   #4
Driving on E
 
Matt Timion's Avatar
 
Join Date: Sep 2005
Posts: 3,110
Country: United States
I'm VERY interested in this. Please keep us updated.
Matt Timion is offline   Reply With Quote
Old 03-28-2007, 10:05 PM   #5
Registered Member
 
The Toecutter's Avatar
 
Join Date: Mar 2006
Posts: 612
Country: United States
Send a message via AIM to The Toecutter
I've always wanted to take an HPV, strip it of the pedal system, and insert a small 5-8 kWh Li Ion pack and 20-30 kW drive system. Would make for an extremely efficient, and fast, high performance motorcycle.
The Toecutter is offline   Reply With Quote
Old 03-29-2007, 09:12 AM   #6
Registered Member
 
trebuchet03's Avatar
 
Join Date: Mar 2007
Posts: 812
Country: United States
Send a message via AIM to trebuchet03
Quote:
Originally Posted by The Toecutter View Post
I've always wanted to take an HPV, strip it of the pedal system, and insert a small 5-8 kWh Li Ion pack and 20-30 kW drive system. Would make for an extremely efficient, and fast, high performance motorcycle.
Go for the Varna design

----
Here's the next bit -- not on actual installation, but resin mixing. And full of tips and advice. Something very important if you're using glass or other fiber.

Mixing Polyester Resin

Oh, I forgot to mention -- the catalyst in polyester resin eats foam.... Just FYI.
__________________
Time is the best teacher. Unfortunately it kills all its students.


Bike Miles (Begin Aug. 20 - '07): ~433.2 miles

11/12
trebuchet03 is offline   Reply With Quote
Old 03-29-2007, 06:19 PM   #7
Registered Member
 
JanGeo's Avatar
 
Join Date: Jan 2006
Posts: 2,444
Country: United States
Location: Tiverton, RI
Send a message via Yahoo to JanGeo
Use epoxy - it's safer to work with and doesn't eat the foam. Was wondering why the form was solid instead of hollow - would take less foam by using the large piece center cuts for the smaller pieces.
JanGeo is offline   Reply With Quote
Old 03-29-2007, 07:03 PM   #8
Registered Member
 
trebuchet03's Avatar
 
Join Date: Mar 2007
Posts: 812
Country: United States
Send a message via AIM to trebuchet03
Quote:
Originally Posted by JanGeo View Post
Use epoxy - it's safer to work with and doesn't eat the foam. Was wondering why the form was solid instead of hollow - would take less foam by using the large piece center cuts for the smaller pieces.
We're using polyester for the tool as it is stiffer than epoxy (the downside to that being it is more brittle). The catalyst does eat foam - but there's no exposed foam on our plug (it's coated with non catalyzed epoxy/fiberglass and bondo). Using epoxy for making the tool would be incredibly expensive too (but I think I'm getting ahead of myself).

I'll keep the hollow plug idea in mind for next year It will require coming up with an accurate way to index (as we're removing the place where we'd place a dowel) but that's a great idea if the shape allows it

For the actual part - we're using an epoxy resin
__________________
Time is the best teacher. Unfortunately it kills all its students.


Bike Miles (Begin Aug. 20 - '07): ~433.2 miles

11/12
trebuchet03 is offline   Reply With Quote
Old 03-30-2007, 04:07 AM   #9
Registered Member
 
MetroMPG's Avatar
 
Join Date: Dec 2005
Posts: 4,223
Country: United States
Quote:
Originally Posted by trebuchet03 View Post
We're building a tool to make a fairing for a tandem trike.
Is it really a tandem? I checked out the Instructables, and it looks like a solo size machine.

Also (and sorry if this has been asked already), how did you decide to go for a full enclosure around the front wheels rather than a narrower body and faired wheels/suspension? EG:




source: http://www.adventuresofgreg.com/RocketMain.html
MetroMPG is offline   Reply With Quote
Old 03-30-2007, 08:05 AM   #10
Registered Member
 
trebuchet03's Avatar
 
Join Date: Mar 2007
Posts: 812
Country: United States
Send a message via AIM to trebuchet03
Quote:
Originally Posted by MetroMPG View Post
Is it really a tandem? I checked out the Instructables, and it looks like a solo size machine.

Also (and sorry if this has been asked already), how did you decide to go for a full enclosure around the front wheels rather than a narrower body and faired wheels/suspension? EG:




source: http://www.adventuresofgreg.com/RocketMain.html

Wow - that was a big mistake on my part... I fixed it now - it should have read tadpole! :P Which also answers your question in regards to why the front is shaped the way it is... There's two wheels in the front - one in the back (this is the tadpole configuration - which used to be called a slingshot).

The tadpole design lets you extend the boom out further allowing you to settle closer to the front wheels (shortening the frame). It also tends to be more stable (designed properly). With two wheels in front - we can get a more blunt shape in front and finish off with a knife edge teardrop (or closer to it) in the rear - this is at the cost of surface area though.

When we get results from scale tunnel testing - I'll let you know what our Cd is


My apologies :P
__________________

__________________
Time is the best teacher. Unfortunately it kills all its students.


Bike Miles (Begin Aug. 20 - '07): ~433.2 miles

11/12
trebuchet03 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot use Fuelly Signature rod1 Fuelly Web Support and Community News 1 11-10-2012 02:04 PM

» Fuelly iOS Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 02:14 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.