1992 Civic VX Interior Wiring Harness & EGR - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 05-02-2011, 03:10 PM   #1
Registered Member
 
Join Date: Jun 2009
Posts: 29
Country: United States
Exclamation 1992 Civic VX Interior Wiring Harness & EGR

Hello fellow Gas Savers,

I have a beautiful cabin wiring harness from a CDM 1992 5-wire O2 Honda Civic VX complete from the under-dash fuse box to the ECU, and out to the p/s shock tower and headlight; the dash harness to the gauge cluster; and the d/s harness to the EGR all the way to the headlight and washer tank. Only blemishes are a few wires clipped at the radio connector (original connector is still there, though) and a clipped connector at the horn (can provide original connector). As you probably know, this wiring includes all the essential wiring in OEM colours for all the special VX features (5-wire O2, VTEC-E, clutch switch, upshift light and EGR)

Also have a VX EGR for sale.

Take both for CAD$125, including shipping anywhere in N. Am. I accept Paypal.

Regards,
Eric
__________________

deschlong is offline   Reply With Quote
Old 05-06-2011, 03:39 PM   #2
Registered Member
 
Join Date: Feb 2011
Posts: 39
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

how much would you sell just the egr box for?
__________________

88hbfirstbuild is offline   Reply With Quote
Old 05-06-2011, 04:50 PM   #3
Registered Member
 
Join Date: Jun 2009
Posts: 29
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

I suggest doing some research on the current market price, and PM me with an offer!
deschlong is offline   Reply With Quote
Old 05-09-2011, 06:34 PM   #4
Registered Member
 
Join Date: Feb 2011
Posts: 39
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

what about 35 shipped?
88hbfirstbuild is offline   Reply With Quote
Old 05-09-2011, 06:51 PM   #5
Registered Member
 
Join Date: Jun 2009
Posts: 29
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

^ 88, You have a PM.
deschlong is offline   Reply With Quote
Old 07-19-2011, 11:32 PM   #6
Registered Member
 
Join Date: Apr 2006
Posts: 270
Country: United States
Send a message via AIM to molecule
Re: 1992 Civic VX Interior Wiring Harness & EGR

the interior harness goes from the headlights to the gas tank and tail lights
if this is included and not cut i would be interested
thanks
__________________
BE ZEITGEISTED
molecule is offline   Reply With Quote
Old 07-20-2011, 05:51 AM   #7
Registered Member
 
Join Date: Jun 2009
Posts: 29
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

The harnesses are uncut from both headlights to the interior cabin, save for at the horn, but I have a replacement pigtail for that (vehicle had an aftermarket horn installed). Additionally, I have a VX engine harness now that is complete, but only cut at the distributor, but I have replacement pigtails for that too.

These harnesses have all the important VX-specific wiring like for the 5-wire O2 sensor, EGR, up-shift light, etc.

The REAR cabin harness (attaches to the main harness in the driver's footwell, and goes to the gas tank and tail lights) is not in any way special to the VX so I didn't pull it. You can acquire this from any CX/VX/DX/Si you find and they are all basically the same save for the addition of a rear wiper (DX, Si) and trunk light (Si).
deschlong is offline   Reply With Quote
Old 07-20-2011, 06:57 PM   #8
Registered Member
 
Join Date: Apr 2006
Posts: 270
Country: United States
Send a message via AIM to molecule
Re: 1992 Civic VX Interior Wiring Harness & EGR

the distributor sensors unfortunately are extremely sensitive so extending them is not an option even with pigtails
the only option is to attach new replacement pins with proper crimp tool and hoping the existing wiring is long enough to reach
if not the entire harness would require to be torn down and those wires would need replaced or the entire engine harness be replaced.
specifically the ckp/tdc/cyp dizzy sensors...also the trip signal from the ecu to the ignitor is subject to resistance change which determines the exact firing time of the coil for each plug
the distributor is probably the worst wires to ever have cut
too bad...because had the owner of the harness had half a brain they would have learned how to depin the connector properly or learned how to rewire the correct distributor they needed internally with the vx wiring & dizzy sensors
but in light of all that...if the harness wasn't cut too short and would still reach the distributor with new pins crimped i would be interested.
otherwise you are barking up the wrong tree with ANY contrary explanation .
i've been through honda wiring diagnosis too many times.

if you want to fight me over this then you will attach the pigtails any way you claim to be proper and then make a video showing an ohm meter attached across each of the dizzy sensors showing me a reading that is within spec.
if that doesn't bother you...then i'll post up the specs if you need them
yes you will need a good distributor to test with
__________________
BE ZEITGEISTED
molecule is offline   Reply With Quote
Old 07-20-2011, 09:33 PM   #9
Registered Member
 
Join Date: May 2011
Posts: 22
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

The originally posted harness could be of much use to me. The damn mice have eaten a bit of my headlight wiring, and a few other things!
GasSavers_Sancho is offline   Reply With Quote
Old 07-21-2011, 02:01 AM   #10
Registered Member
 
Join Date: Jun 2009
Posts: 29
Country: United States
Re: 1992 Civic VX Interior Wiring Harness & EGR

Quote:
Originally Posted by molecule View Post
... if you want to fight me over this ...
Not sure where this aggression is coming from. This isn't a tech thread, it's a for sale thread. I am describing exactly the state of the harness to the best of my knowledge. If it will work for your purposes, then I am happy to divest myself of it. I do not intend to do any repair work to the harness - I will leave that for the buyer. Of my own accord, I have generously sought out replacement pigtails, and these will be included with the sale. You are free to use these or not as you desire.

FYI, less than 2 inches was cut at the distributor.

Finally, to both posters directly above, please contact me through PM to discuss the finer points of the purchase if you remain serious buyers.

The EGR is already sold.
__________________

deschlong is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cars/Trucks - Overachievers. GeneK General Fuel Topics 7 09-06-2009 08:36 AM
Does my riding mower need a differential? GasSavers_maximilian General Discussion (Off-Topic) 15 06-13-2009 03:50 PM
Stealth / Performance Exhaust System Hybrid JohnNeiferd General Fuel Topics 9 07-27-2008 02:40 PM
Is there a OBDI or OBDII conversion for older vehicles? kozaz General Fuel Topics 3 11-13-2007 07:32 PM

» Fuelly iOS Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.