Fuel Heaters - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 12-12-2006, 11:16 AM   #1
Registered Member
 
GasSavers_Red's Avatar
 
Join Date: Nov 2006
Posts: 513
Country: United States
Send a message via MSN to GasSavers_Red
Fuel Heaters

Do they work? Or just a 'Net myth?

Run down on the theory. Your fuel line to your injectors or carb are rerouted to a holding canister that is heated by your engine coolant. The now warmed fuel can be atomized into a finer spray by your fuel injectors resulting in a more efficient burn.

http://brightgreen.us/explanation.htm

Thanks
__________________

__________________
GasSavers_Red is offline   Reply With Quote
Old 12-12-2006, 11:25 AM   #2
Registered Member
 
omgwtfbyobbq's Avatar
 
Join Date: Jul 2006
Posts: 1,516
Country: United States
I'm going with net myth. Properly design modern FI systems should atomize the fuel over a wide range of temperatures... But, it may be like acetone, where it can clean out older injectors, or in this case, help injectors that are in poor shape.
__________________

__________________
Quote:
Originally Posted by FormulaTwo
I think if i could get that type of FE i would have no problem driving a dildo shaped car.
omgwtfbyobbq is offline   Reply With Quote
Old 12-12-2006, 11:47 AM   #3
Supporting Member
 
cfg83's Avatar
 
Join Date: Sep 2006
Posts: 1,779
Country: United States
Red -

The Hydrogen-boost guy uses them in his solution :

http://www.hydrogen-boost.com/

Other people have gotten mixed results. My mechanic doesn't want to mess with them because he doesn't want to cut the fuel line. They are common in (older?) Diesels for pre-heating the thick diesel fuel. In one Mercedes Benz, my mechanic told me that the fuel line runs *through* the coolant reservoir.

I also agree that the older the car, chances are, the better the results.

The one you are showing appears to be the best manufactured.

CarloSW2
__________________
Old School SW2 EPA ... New School Civic EPA :

What's your EPA MPG? https://www.fueleconomy.gov/feg/calculatorSelectYear.jsp
cfg83 is offline   Reply With Quote
Old 12-12-2006, 01:30 PM   #4
FE nut
 
diamondlarry's Avatar
 
Join Date: Sep 2005
Posts: 1,020
Country: United States
I may have some results to report on the Brightgreen unit. I have one on order that should be here by this week or next. I also have one of thier squirter units coming.
__________________
Horsepower is how hard you hit the wall, torque is how much of the wall you take with you.

2007 Prius,



Team Slow Burn
diamondlarry is offline   Reply With Quote
Old 12-12-2006, 01:35 PM   #5
Registered Member
 
MetroMPG's Avatar
 
Join Date: Dec 2005
Posts: 4,223
Country: United States
What kind of testing are you going to do? Can it be controlled? (Would be tough, I imagine, if you have to do a lot of wrenching to go from "A" to "B".)
MetroMPG is offline   Reply With Quote
Old 12-12-2006, 01:41 PM   #6
*shrug*
 
Join Date: Sep 2005
Posts: 6,195
Country: United States
Here's Tony's thoughts (Tony is a clever fellow): http://www.fuelsaving.info/atomisation.htm
SVOboy is offline   Reply With Quote
Old 12-12-2006, 01:45 PM   #7
FE nut
 
diamondlarry's Avatar
 
Join Date: Sep 2005
Posts: 1,020
Country: United States
Quote:
Originally Posted by MetroMPG
What kind of testing are you going to do? Can it be controlled? (Would be tough, I imagine, if you have to do a lot of wrenching to go from "A" to "B".)
I will probably rely heavily on my current figures for a baseline. As for the difficulty of going from "A" to "B", the heater is supposed to have a type of quick dis-connect fittings. It would just be a matter of the pressurized fuel in the line leaking out when the connection is loosened.
__________________
Horsepower is how hard you hit the wall, torque is how much of the wall you take with you.

2007 Prius,



Team Slow Burn
diamondlarry is offline   Reply With Quote
Old 12-12-2006, 01:57 PM   #8
Supporting Member
 
cfg83's Avatar
 
Join Date: Sep 2006
Posts: 1,779
Country: United States
diamondlarry -

Quote:
Originally Posted by diamondlarry
I will probably rely heavily on my current figures for a baseline. As for the difficulty of going from "A" to "B", the heater is supposed to have a type of quick dis-connect fittings. It would just be a matter of the pressurized fuel in the line leaking out when the connection is loosened.
Are those the "bypass valves" I saw before? I keep trying to find a picture on the net of the fog device with the bypass valves, but they seem to have vanished.

CarloSW2
__________________
Old School SW2 EPA ... New School Civic EPA :

What's your EPA MPG? https://www.fueleconomy.gov/feg/calculatorSelectYear.jsp
cfg83 is offline   Reply With Quote
Old 12-12-2006, 02:22 PM   #9
FE nut
 
diamondlarry's Avatar
 
Join Date: Sep 2005
Posts: 1,020
Country: United States
I don't think I'm familliar with the by-pass valves.
__________________
Horsepower is how hard you hit the wall, torque is how much of the wall you take with you.

2007 Prius,



Team Slow Burn
diamondlarry is offline   Reply With Quote
Old 12-12-2006, 02:45 PM   #10
Registered Member
 
GasSavers_Red's Avatar
 
Join Date: Nov 2006
Posts: 513
Country: United States
Send a message via MSN to GasSavers_Red
Quote:
Originally Posted by SVOboy
Here's Tony's thoughts (Tony is a clever fellow): http://www.fuelsaving.info/atomisation.htm
Thanks, that report matches with what I originally thought, FI vehicles vaporize fuel to such a high degree that heating it is pointless. But I figured it was worth a shot.
__________________

__________________
GasSavers_Red is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Incorrect Milage Calcuatlion PatM Fuelly Web Support and Community News 4 07-17-2009 07:21 PM
Missing Fuelup jmonty Fuelly Web Support and Community News 3 05-27-2009 04:10 AM
What is this stat? cavale Fuelly Web Support and Community News 1 09-03-2008 07:23 AM
total fuel cost for fill-up instead of price per gallon EmptyH Fuelly Web Support and Community News 1 08-26-2008 11:14 AM
"active" aero grille slats on 06 civic concept MetroMPG General Fuel Topics 21 01-03-2006 12:02 PM

» Fuelly iOS Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 05:18 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.