Turbocharging for FE - Fuelly Forums

Click here to see important news regarding the aCar App

Reply
 
Thread Tools Display Modes
 
Old 01-21-2008, 01:20 PM   #1
Senior Member
 
Join Date: Mar 2011
Posts: 446
Country: United States
Location: Charlotte nc
Turbocharging for FE

it may sound strange but a light pressure turbo system may provide a fuel savings. I am currently researching a LPT system for my wagon. My research has shown that a low (2-5 psi) boost turbo system will keep the transmission in lock up on hills resulting in a small improvement in FE. If I end up with the same FE and a touch better freeway performance I'll be fine with that. Having the car downshift to 3rd and even 2nd to make hills is ridiculous.
__________________

Philip1 is offline   Reply With Quote
Old 01-21-2008, 06:02 PM   #2
Registered Member
 
Join Date: Apr 2007
Posts: 290
Country: United States
You aren't alone in thinking that turbos can improve FE. Lots of auto manufacturers are going in that direction as well.

A quick tip though, is that if you can manage (ie, if traffic allows) it, you should try to coast up the hill as much as possible. Get going fast on flat ground, and then coast up the hill as far as possible. If absolutely necessary, you can downshift, but your momentum might be able to tackle some of the smaller "bumps in the road."
__________________

Erdrick is offline   Reply With Quote
Old 01-22-2008, 03:30 AM   #3
Registered Member
 
Join Date: Oct 2005
Posts: 682
Country: United States
A properly matched turbocharger (meaning one designed to provide boost at LOW rpm) will usually provide better efficiency. It usually also helps to change the gear ratios to a taller gear with a low rpm turbo.

Unfortunately, most guys want power and they size the turbo for high rpms and high power. This will drain your gas tank faster too.
__________________
Capitalism: The cream rises. Socialism: The scum rises.
Sludgy is offline   Reply With Quote
Old 01-22-2008, 04:03 AM   #4
Registered Member
 
lunarhighway's Avatar
 
Join Date: Dec 2006
Posts: 360
Country: United States
turbo's definately are handy to improve FE, the main advantage is that they can get more power out of a much smaller engine block.

Fiat for example is currently developeing a 2 cylinder 0.9L turbo engine that should output between 90 and 110 hp... i'd love to put that in my car... less weight more power...
__________________

lunarhighway is offline   Reply With Quote
Old 01-22-2008, 05:04 AM   #5
DRW
Registered Member
 
Join Date: Oct 2006
Posts: 615
Country: United States
I can't help but notice you're trying to keep the auto trans from downshifting too early. Perhaps the problem isn't a lack of power, since most auto trannies will shift to an easier gear around 2/3 throttle, which means there's more throttle and slightly more power already there.

I'm getting good FE out of my turbo car by staying out of boost. I'm very familiar with the operation of my car, and it will begin to run rich even when making low boost. I tried leaning it out at the onset of boost, but it just knocks at that point. So I tried reducing ignition timing at that point to reduce knock and power dropped noticeably. Timing has more of an effect on power than A/F ratios, and running a richer A/F ratio lets me use more timing.

Have you thought about using adjustable cam gears to improve low end power? MetroMPG has a good thread about swapping the cam in his metro.
__________________
Dave W.
DRW is offline   Reply With Quote
Old 01-22-2008, 09:22 AM   #6
Senior Member
 
Join Date: Mar 2011
Posts: 446
Country: United States
Location: Charlotte nc
the problem with this car is that it is heavy and has a smallish 4-cyl (3400lb and a 2.2l) with just 135hp. it really needs a bunch more torque to move the car effectively. on the freeway I come to a slight rise and I am down on two or even three gears to get over it, this is at 65-70mph. If a low pressure turbo system will make enough differenc that I only need one lower gear than I will see some improvement. Trust me 6500 at 65mph is NOISY!!!
Philip1 is offline   Reply With Quote
Old 01-22-2008, 09:42 AM   #7
Member
 
Join Date: Jun 2011
Posts: 49
Country: United States
Location: FL
3400lbs is indeed quite hefty for an engine with as little power as that de-tuned Ecotec... Have you looked into a transmission controller? You may just want to control the gears yourself, this may alleviate some of your downshifting problem (stay in higher gears at the expense of "performance" maybe?)

Look here at the transmission controller: http://awshifting.com/index.html

It may be a good first step for you and you should definitely be able to improve your fuel economy using it. A turbo is going to be an expensive and complicated endeavor, just remember that.
varg is offline   Reply With Quote
Old 01-22-2008, 10:01 AM   #8
Senior Member
 
Join Date: Mar 2011
Posts: 446
Country: United States
Location: Charlotte nc
turbo is easy on this engine trans control isn't and the site you posted doesn't cover any gm transmissions. But thanks anyway.
Philip1 is offline   Reply With Quote
Old 01-22-2008, 01:08 PM   #9
DRW
Registered Member
 
Join Date: Oct 2006
Posts: 615
Country: United States
Quote:
Originally Posted by philip1 View Post
the problem with this car is that it is heavy and has a smallish 4-cyl (3400lb and a 2.2l) with just 135hp. it really needs a bunch more torque to move the car effectively. on the freeway I come to a slight rise and I am down on two or even three gears to get over it, this is at 65-70mph. If a low pressure turbo system will make enough difference that I only need one lower gear than I will see some improvement. Trust me 6500 at 65mph is NOISY!!!
Oh wow, I didn't realise your power to weight ratio was that bad. OTOH it's nice to see someone actually opt for the base engine instead of the ultra gashog option. Since you're climbing hills, weight reduction will make a bigger difference on your car.

How about a small shot of nitrous for the hills?
If the guys at Mythbusters can come up with a JATO for their car I don't see why you couldn't use one, too!
__________________
Dave W.
DRW is offline   Reply With Quote
Old 01-23-2008, 05:32 AM   #10
DRW
Registered Member
 
Join Date: Oct 2006
Posts: 615
Country: United States
Quote:
Originally Posted by philip1
on the freeway I come to a slight rise and I am down on two or even three gears to get over it, this is at 65-70mph. If a low pressure turbo system will make enough differenc that I only need one lower gear than I will see some improvement. Trust me 6500rpm at 65mph is NOISY!!!
I have a feeling you might get a good bump in FE with a slight adjustment to your speed. Would the trans hold a higher gear if you kept the speed around 55-60mph on the uphills? WOT at high rpm is will really suck down the gas.
__________________

__________________
Dave W.
DRW is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Print Lauriefire Fuelly Web Support and Community News 2 10-30-2010 11:21 AM

» Fuelly Android Apps
Powered by vBadvanced CMPS v3.2.3


All times are GMT -8. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.