RobertV |
01-17-2015 11:05 PM |
Quote:
Originally Posted by earth449
(Post 181440)
Thanks for your suggestion, I already imported to Fuelly.com and it cannot add new service record but it available on gas cubby app. I found the problem about fuel and distance unit. On Fuelly.com webpage I see fuel and distance unit are "Litres" and "Kilometers" but on GasTracker+ it's show "Gallon" and "Miles", Why they don't show the same unit?
Thanks
|
So as to not clutter this thread please refer to this thread: https://www.fuelly.com/forums/showthread.php?t=17154
(we're aware of the issue with international units and have a fix pending approval).
Quote:
Originally Posted by Picanol
(Post 181441)
New user with iPhone 6. Data sync only from the website to the app but not from app to web site. Any suggestion?
|
I'm confused by this. Are you using Gas Cubby? This thread is regarding Gas Cubby.
Quote:
Originally Posted by st333
(Post 181446)
Also having issues after upgrading to iphone 6, please help.
I was able to sync my data, but the mileage details is way off.
|
Does the data look like it was converted incorrectly/wrong units?
If so, take a look at this-
Quote:
My data was lost and I followed the directions to recover through Online Sync but, when it appeared, the distance, volume and fuel efficiency numbers were all wrong. What happened?
The default unit setting in Gas Cubby is MPG (US), which means it takes miles and US gallons for input and then outputs miles per gallon. You likely have been using Gas Cubby with other units but, when your data was lost, the units were reset to the default MPG (US). Online Sync only stores the numbers, not the units, so the proper numbers were downloaded but you changed the units back to the proper units setting after the data was recovered, doing a unit conversion in the process.
To fix this, do the following:
Note: if you have not tapped Sync since recovering the data and changing the units, you may skip to step 4.
- change the units back to MPG (US)
- go to the Setup/Login screen and tap Delete Synced Data
- return to the main screen and tap Sync
- return to the Setup/Login screen and tap Delete Local Data
- change the units to what you had been using all along
- return to the main screen and tap Sync.
All your data should now be properly restored.
|
|