Fuelly Forums

Fuelly Forums (https://www.fuelly.com/forums/)
-   General Fuel Topics (https://www.fuelly.com/forums/f8/)
-   -   Pictures of Mods (https://www.fuelly.com/forums/f8/pictures-of-mods-4656.html)

SVOboy 05-28-2007 12:14 PM

Pictures of Mods
 
All the time I see pictures of various mods floating around, and I would like to collect them up to make a gallery on crxmpg as well as just have a good inspiration thread going here.

So, that said, post up your mods and any description you want, and lemme know if I should include it on crxmpg while you're at it.

Thanks all.

SVOboy 05-30-2007 10:56 AM

Aww, c'mon now. Don't make me dreg through every post and ask everyone if I can borrow them, *tear*

omgwtfbyobbq 05-30-2007 10:58 AM

Just nab 'em under "fair use". If someone doesn't like it they can just PM/email you and have it taken down.

SVOboy 05-30-2007 10:59 AM

Yeah I spose. La la la. If only I were done finals and could put the work in right now!

GasSavers_TomO 05-30-2007 11:46 AM

https://www.gassavers.org/garage_imag...hc5drh48it.jpg
My "JDM Spoon Style" Ebay Mirrors; Half the weight of the OEM elephant ears and more aerodynamic.

https://www.gassavers.org/garage_imag...h76hai1n6t.jpg
Partial Belly Pan made from Coroplast

https://www.gassavers.org/garage_imag...rosfouy162.jpg
Lighter than VX wheels

https://www.imagestation.com/picture/...6/ea16b41c.jpg
Aftermarket intake (Venturi effect to speed up intake charge even more)

And the best mod yet:
https://www.imagestation.com/picture/...d/e9ce2b15.jpg
Keeps people from riding my arse

https://www.imagestation.com/picture/...8/e94479b1.jpg
Grill Block

https://www.imagestation.com/picture/...3/e94493d8.jpg
Catch Can

https://www.imagestation.com/picture/...1/e94493f1.jpg
Header

https://www.imagestation.com/picture/...0/e9449405.jpg
Exhaust and under pan

https://www.imagestation.com/picture/...0/e944941c.jpg
Muffler and Tip

I pieced the exhaust together for less than $100

VetteOwner 05-30-2007 12:09 PM

ehhh hmm
https://www.fuelly.com/attachments/fo...f6fe9f74c8.jpg

efan and cai

basjoos 05-30-2007 05:22 PM

Well, here goes (and you can use them on CRXMPG). Here are a few of my mods:
Hand throttle (a wingnut on the handle pivot adjusts the holdback tension)
<https://www.fuelly.com/attachments/fo...3df48317a1.jpg

Interior side mirror (they are on both doors)
https://www.fuelly.com/attachments/fo...65f6cabdd8.jpg

SuperMID (and diodes installed to replace the hard-to-reach burnt out dash lights)
https://www.fuelly.com/attachments/fo...ed75a207a7.jpg

Boattail
https://www.fuelly.com/attachments/fo...44ce63eaef.jpg
https://www.fuelly.com/attachments/fo...255a5f90d3.jpg

Nosepiece (the radiator air inlet is the slot at the front of the hood, radiator air is exhausted into the front wheel wells and along the exhaust pipe tunnel into the right rear wheel well)
https://www.fuelly.com/attachments/fo...76567635e4.jpg
https://www.fuelly.com/attachments/fo...0492fcc4d9.jpg

Front wheel well skirt (piano hinge on top, there is a spring at each lower corner to retract the skirt when the wheel straightens)
https://www.fuelly.com/attachments/fo...51ab967b70.jpg
https://www.fuelly.com/attachments/fo...849df535f7.jpg
https://www.fuelly.com/attachments/fo...80076f0429.jpg

Fear wheel well skirt
https://www.fuelly.com/attachments/fo...2c8161ec5f.jpg

Side skirt (there is an inner and outer skirt)
https://www.fuelly.com/attachments/fo...1793f15139.jpg

Front wheel spoiler
https://www.fuelly.com/attachments/fo...de60545ce0.jpg
https://www.fuelly.com/attachments/fo...028bf220b4.jpg

Rear wheel spoiler (before I installed the side skirts)
https://www.fuelly.com/attachments/fo...35799cc1f4.jpg

Underbody panelling (view from rear)
https://www.fuelly.com/attachments/fo...25e37a67c7.jpg

False windshield
https://www.fuelly.com/attachments/fo...852dc0c206.jpg
https://www.fuelly.com/attachments/fo...a40756cfc9.jpg

Additional pics of my car and concept models I used for ideas in designing my mods are on my photo site:
https://smg.photobucket.com/albums/v4...Honda%20Civic/

kickflipjr 05-30-2007 07:22 PM

https://www.gassavers.org/garage_imag...lbmkes26m9.jpg

Protege Grill Block. Made of zip-ties, screws, and coroplast.

Dynamically Aero 05-30-2007 07:31 PM

TomO, tell us about the strut tower brace. :thumbup:

By allowing you to go faster around corners, how much do you believe it's worth in FE? ;)

GasSavers_TomO 05-30-2007 07:43 PM

Well, the 215/50/13 tires did more for cornering speed than the strut tower brace did, but the brace does its part too. I don't go around corners fast...it's more of the correct line (or racing line, if you will) so as to not lose speed. most all of my corners on my daily commute are on and off ramps.

As far as FE is concerned... the fact that I maintain or am able to increase speed on those corners keeps me from having to accelerate all over again. The FE driving techniques that I use are: Best line cornering, anticipate red lights (coast longer), slow acceleration, highway driving. And I still maintain a 50mpg 90 day average. The VX is quite a nice car ;)


All times are GMT -8. The time now is 10:36 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.