Have Photoshop, and I'm bored !
What do you all think of these mods to a Mazda MX-3 ?
https://farm2.static.flickr.com/1033/...32b57f05_o.jpg and https://farm2.static.flickr.com/1389/...fd94f0b5_o.jpg and https://farm2.static.flickr.com/1142/...7ff12e63_o.jpg or : https://farm2.static.flickr.com/1135/...a2ca1da6_b.jpg |
As far as the split boat tail, I'm grabbing at straws. The empty area ( the blue area) would most likely still just have stagnant air, but hopefully it would be less turbulent than air behind a Kamm back.
Your thoughts ? |
NerdsLAM -
Did the GM Impact/EV1 inspire you for the butt? Ot also reminds me of a Honda Insight. The "Duck-bill" butt looks cool. Can you get away with the duck-bill shape from an aero standpoint? CarloSW2 |
bottom line
Quote:
|
Quote:
Huh ? |
Quote:
I didn't expect that one ! Did you see the little cartoon face on the car below the first sketch ? That is the first thing that started going through my mind ( " Man this thing looks like it should have a eyes stuck on there " ) Quite wierd looking for sure ! I was just brain storming. A problem that you would have with something like that would be where to put the taillights abnd the plates. I came up with the idea because I'd like to put a boat tail on my car, but have it compact. I would love to have one like Basjoos, but I was wondering if you could just create two smaller boattails and create two smooth wakes like a catamarand. If you folks remember, I have the same car as Basjoos. I really admire all that he has done. What an awesome machine he has from an aero standpoint. I wonder if the stagnation in the center area ( the blue arrows )would be smoother than just a regular Kamm back. As far as the inspiration - I just did what looks smooth. It just goes to show how that good aero has a lot in common in different cars. After I did the image, I started noticing how the second image down even looks a lot like the tail end of the Probe V. |
Quote:
https://www.swbstudios.com/artwork/917lh.jpg |
Looks like the 'Mach 5'.
|
Quote:
|
Quote:
Beautiful car. I wonder how slick that it was. |
Okay, I've got a few... check out this civic idea...
https://www.fuelly.com/attachments/fo...e9fc9a8b60.jpg the trunk area is cut down.. I planned this out.. https://www.fuelly.com/attachments/fo...dfa0a95f57.jpg Here's a geo metro convertible... The NACA duct was conceived in whimsy https://www.fuelly.com/attachments/fo...c1117271c8.jpg woo! |
I'm sorry they don't relate to the mx-3, it just seemed like the best thread to post a random photoshop job (based on the title, which applied to me exactly)
|
Nice looking Civic.
Next, you should photoshop a closed window! :) |
https://www.freewebs.com/red91sit/lincoln/gas/modded.jpg
My least modded idea of a very aero car. (started at .31) I tried the same thing with the mercedes, but it got very ugly. My other idea is an Aerodynamic Wagon Hyundai Accent (One of my personal fav. cars) https://www.freewebs.com/red91sit/lin...s/butugle2.jpg https://www.freewebs.com/red91sit/lin...as/butugle.jpg |
https://www.fuelly.com/attachments/fo...1a61c6fd14.jpg
that last one reminded me a bit of my car so i gave it a try. btw i think most new car's rear bumpers go way to low... they cover all the "ugly" exhoust components hanging there, but they sort of destroy the natural defuser that was there |
I like Nerd?s third rendering. It is what I want to drive at with a pickup. Not such a long tail because a pickup still has to be able to carry 4x8s and that requirement limits width reduction. I wonder how much reduction of coefficient of drag would result from a 55% reduction in wake area?
|
All times are GMT -8. The time now is 05:31 PM. |
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.