My 701 Enduro Fuel-up Log

2018 Husqvarna 701 Enduro
Property of 81435. Added Mar 28 2019

Showing a single fuel-up

Jul 20 2019

- [x] Check that the electrical equipment is functioning correctly. - [x] Read out the fault memory using the KTM diagnostics tool. - [x] Change the engine oil and filters, changed the oil screens. - [x] Check the front brake linings. - [x] Check the rear brake linings. - [x] Check the brake discs. - [x] Check the brake lines for damage and leakage. - [x] Check the rear brake fluid level. - [x] Check the free travel of the foot brake lever. - [x] Check that the shock absorber and fork are leak tight. If necessary and depending on use, service the fork and shock absorber. - [x] Check the tire condition. - [x] Check the tire air pressure. - [x] Check the spoke tension. - [x] Check for rim run-out. - [x] Check the chain tension. - [x] Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation. - [x] Check the brake fluid level of the front brake. - [x] Check the play of the steering head bearing. - [x] Change fuel screen. - [x] Check the antifreeze and coolant level. - [x] Check the screws and nuts for tightness. - [x] Check the headlight setting. - [x] Check that the radiator fan is functioning properly. - [x] Final check: Check the vehicle for roadworthiness and take a test ride. - [x] Read out the fault memory using the KTM diagnostics tool after a test ride.

• 1,092

  Odometer

Added by 81435 on Jul 20 2019 at 9:58 pm