Measure Fuel usage using DVM

[cwa]

I have connected one of the Injector Signal (& GND) to DVM (Digital Volt Meter) and here are the results.

Park = .47 V - .51V
Neutral (idel) = .48 V - .52V
D (With Break) = .49V - .54V

Neutral (2500rpm) = .95V - 1.00 V

I have not tested while moving as DVM cables are short and it was dificult to have a proper connection.

Any similar experience or meter readings?

Also when I put the DVM to check the ACV, I got zero reading.

CWA